Refinishing Your Hardwood Floors

by Posted in Home Improvement Tagged , , , ,

Hardwood Floor Refinishing Bergen County NJ is like a magical makeover for your hardwood floors, giving them new life and adding precious years to their lifespan. However, it’s not an easy DIY project and hiring a Bona Certified Craftsman is recommended.

Refinishing involves sanding your hardwood flooring down and applying a new finish to it. It also involves repairing any water damage that may have occurred over the years.

Refinishing hardwood floors is a major undertaking that can take several days and requires the use of special equipment. The process starts with sanding the floor down to remove the old finish and any dirt or debris that has built up over time. This step can be messy, but it is necessary for a smooth surface. It is also important to address any water damage issues before beginning the refinishing process. This includes repairing any warped or swollen boards, removing any water stains, and ensuring the wood is thoroughly dry before beginning the refinishing process.

The next step in the refinishing process is applying a new coat of finish to the floor. This will protect the floors and give them a new, fresh look. It is important to choose a quality finish, such as polyurethane or polyurea. Once the floors have been buffed and finished, they will need to be allowed to cure for a few days before they can be used again.

While refinishing hardwood floors can be a messy, time-consuming project, the results are worth it. Not only do they add a beautiful, timeless look to any room, but they can also increase the value of your home. If you are considering refinishing your hardwood floors, it is important to find a professional who is experienced with this type of work. Look for a flooring expert with an NWFA certification, which means that they have taken and passed a rigorous exam and have extensive experience in the field.

Hardwood floors are known for their beauty and durability, but they can wear down over time with heavy foot traffic and everyday activity. Regular sweeping and cleaning can help to mitigate some of the problems, but major scratches, gouges, or dents are often best addressed by refinishing. If you are concerned that your floors are in need of refinishing, contact your flooring experts at BCC for an assessment.

Once the refinishing is complete, it’s time to stain your hardwood floors. This is a great opportunity to make your rooms unique and match your décor. It is a good idea to talk with your floor guys before starting this step, so they know what kind of stain you want and have samples on hand for you to try out. It is also a good idea to test your stain on a small section of your floor before making a final decision.

Sanding

Hardwood floors are a beautiful addition to any home. However, they are not immune to the effects of time and daily wear and tear. When you notice that your wood floors are starting to look dull, scratched, or scuffed, it is time to refinish them. This is a simple process that can greatly improve the overall appearance of your floor.

First, you will need to sand the surface of your hardwood. You will need to use a large drum sander, and be sure to wear appropriate safety gear. It is also important to sand in the direction of the grain to avoid damaging your floors. Next, you will need to clean the wood thoroughly before applying a new finish. If you have pet stains or old varnish, these will need to be removed before the floor can be refinished.

When sanding, be sure to get into corners and crevices as well. This will help prevent splintering when you apply the stain and varnish. It is also a good idea to sand the edges of the boards, as this will help them adhere better to the finish. You will also need to clean the sanding dust off of your floor periodically, as this can be very messy.

Before you begin the sanding process, be sure to remove any furniture that you want to keep in your house. You will also want to cover any doors and windows with plastic sheets to keep dust from blowing into the rest of your home. Once the sanding is complete, you will need to vacuum and mop the floor thoroughly. This will ensure that your new finish is as clean as possible.

When choosing a stain, it is important to choose one that is low in VOC (volatile organic compound). You will also need a clear varnish that will protect the hardwood from moisture and UV rays. There are a number of different types of varnish, so be sure to research them carefully before making your final decision. Also, it is a good idea to purchase a lambswool applicator, which will make it easier to apply the finish and help prevent streaking.

Staining

Once the sanding is complete, you can apply stain if you choose to do so. Staining can completely change the look and feel of your floors. If you’re unsure of what color to use, try looking in magazines or online for inspiration. You can also take a trip to your local big box hardware store and browse the floor isle for ideas. Then take a small sample of the stain home and test it in a small, inconspicuous area.

Darker colors are typically more popular for wood floors, but lighter stains can be just as beautiful. It’s important to choose the color carefully and consider how it will look with your existing furniture. If your refinished hardwood floors have significant scratches or gouges, darker stain colors may camouflage them better than lighter ones would. However, these flaws are usually not a good reason to refinish your floors, as the damage can usually be corrected with resurfacing or repairing.

When applying the stain, it’s important to work with a brush or rag and follow the direction of the wood grain. Be sure to wipe off any excess stain. Then let the stain dry. Once the stain is dry, you can move your furniture back into the room and enjoy your newly refinished hardwood floors!

If you’re not sure about sanding and staining your own floors, it might be wise to hire a professional. A professional will have the tools and knowledge needed to do the job properly, resulting in beautiful floors you’ll be proud of. However, this can be a costly investment, so make sure you weigh the pros and cons of hiring a professional.

When considering whether or not to hire a professional, be sure to factor in the cost of materials. The refinishing process can create a lot of dust, so it’s important to have a vac and masks on hand to prevent contaminating the air in your house. You’ll also need to purchase stain, sandpaper, and a buffer. It’s also a good idea to budget for the time it will take to finish the project, as you’ll need to allow for drying between coats of polyurethane.

Sealing

A good refinishing job will restore your hardwood floors to their original beauty and add value to your home. But, as with any flooring material, there will come a point when it is time for replacement rather than refinishing. In this case, resealing can provide added protection to your hardwood and extend the lifespan of the finish and your investment.

The process of resealing involves applying a top coat of protectant to your hardwood floor, much like you did when the finish was initially applied. The sealant will help keep moisture from damaging the wood, and it will also enhance the color of your floor and bring out the grain patterns. Sealant can be either an acrylic or polyurethane coating, which will be applied to the surface of your wood flooring.

Typically, you will apply two coats of the protective product to your hardwood floors, giving each coating at least one hour to dry between applications. Before you reseal your floors, it is important to ensure that the room is well ventilated and that you are wearing personal protective equipment, as many sealants emit harmful vapors.

It is also a good idea to remove all your furniture from the area in which you are working. Leaving your furniture in the middle of the room will create an obstacle for the sanding machine, making it difficult to maneuver the machine and could result in irreparable damage to your hardwood floors. If you cannot remove your furniture, you should cover it with a sheet or plastic and secure it with tape.

Once the floors have been resealed, they should be left to cure for several days before you can return your furniture to the room. Refinishing your hardwood floors is a labor-intensive task that can take four to seven days to complete, but when done properly, it will provide a beautiful look to your home and extend the life of your existing finishes.

Home Plumbing Facts You Need to Know

by Posted in Plumbing Tagged , , , , , , , , , , ,

Plumber Tampa uses basic laws of gravity, pressure, and water, seeking its level to bring in fresh water and drain wastewater. Knowing some basic plumbing facts can make your next pipe-related project go more smoothly, minimize panic in the event of a problem, and help you save money.

plumbing

Two different subsystems comprise your home plumbing system: the home supply and drainage pipes. The two systems are separate, but there are bridges called fixtures where fresh water enters and wastewater leaves.

A home plumbing system is a complex network of pipes, valves, and fixtures that supply clean water and remove waste. Its components include the main water supply pipe that connects a home to a public water source or private well, the water meter that tracks usage, and the main shut-off valve where you can stop water flow to a home. A home’s plumbing system also includes long or short straight pipes, T-sections that direct water at right angles, elbows for directional adjustments and brass or gate valves to control flow.

The supply pipes that carry fresh, potable water throughout a house are usually made from iron, copper or plastic and are typically under pressure, so they can deliver water to fixtures like sinks, toilets and showers. They also transport hot water to a home’s water heater. The pressure that keeps these pipes flowing is vital because gravity and the tendency of water to seek its own level would otherwise cause them to empty out of a sink or drain.

When selecting the proper pipe material, a homeowner must consider budget, durability, water quality and installation process. Rigid copper, often referred to as hard copper, is the most common choice for home supply lines because of its cost-effectiveness and resistance to corrosion and rust. Polyvinyl chloride (PVC) and cross-linked polyethylene (PEX) are other popular choices for home supply pipes because of their cost-effectiveness, flexibility and freeze resistance.

These types of piping also differ in their ease of assembling and sealing. PVC and PEX pipes have push-on joints that are quick and easy to assemble. Copper is harder to work with, but it can be sealed more effectively with solder. A plumber can recommend the best type of pipe for a specific home project.

While supply lines may receive the most attention from homeowners, your drain pipes are equally important for disposing of wastewater while preventing fumes and gurgling noises. This system of vents and traps, commonly referred to as the drain-waste-vent (DWV) system, is responsible for carrying waste and sewage from your home to your municipality’s sewer line or your personal septic tank and field. Having an understanding of this unobtrusive but vital system can help you identify and remedy problems such as slow drainage or sewer gas smell.

Unlike supply pipes, which are pressurized to facilitate water flow, drain pipes must be connected to outside air in order to properly balance atmospheric pressure. This ensures that water doesn’t build up in your fixtures and prevents noxious gases, such as methane, from seeping into your home. Essentially, a home’s DWV system consists of drain pipes, vent pipes and the traps that lie beneath each fixture.

Each fixture has a trap, which is usually shaped like a U and lies directly below the drain pipe. The p-trap seals the trap and ensures that wastewater and sewage travel downward rather than backward into the fixture. The vent pipe, on the other hand, connects to the roof and outside air to neutralize pressure within the system and relieve noxious fumes.

The final component of your DWV system is the main sewer line, which is shown on a plumbing diagram as the vertical soil stack that runs from your house to the municipal sewage line or septic tank and field. A sewage line diagram shows the connection between this main line and the vent pipes, which carry noxious sewer gases away from your home to the atmosphere.

Whether you’re building a new house or renovating your existing one, the right plumbing fixtures can add to the beauty and functionality of your home. The role of these fixtures is not just limited to providing water for use; they also help in ensuring the health and safety of the people living in your house by removing wastes, wastewater, and sludge.

The most commonly used plumbing fixtures are toilets, showers, faucets, and kitchen and bathroom sinks. However, this is not the end of the list as there are many other essential plumbing fixtures such as bidets, laundry trays, garbage disposals, and heated floors that you can add to your house.

These fixtures are often made from hardwearing materials such as stainless steel, porcelain, or brass and come in a wide range of styles and designs to suit your taste and needs. When choosing the right ones for your home, consider the following factors:

Aside from being durable and reliable, these fixtures should be easy to maintain and clean. Moreover, you should look for ones that are energy-efficient as they can help in saving on utility costs.

Investing in the right plumbing fixtures can improve your home’s value and marketability, particularly when it comes time to sell it. Buyers will be impressed by the quality and efficiency of your household’s plumbing system, which can lead to a higher asking price. In addition, upgrading your fixtures to more efficient models can help conserve natural resources and reduce the strain on local water supplies. This, in turn, can also contribute to the sustainability of your community. It is therefore essential that you understand and know how your home’s plumbing fixtures work, their various functions, and their importance in your daily life.

The water meter measures your home’s water usage for billing purposes. It works like a car’s odometer, recording the total volume of water used over time. Your water meter may be one of two types: an analog dial or a digital display. It is important to know how your meter reads so that you can spot a leak or other problem quickly.

Depending on your area, you will be charged per unit of water. Typically, these units are measured in cubic feet or gallons. A cubic foot is equal to 7.48 gallons. Water meters are generally owned, read and maintained by a city, rural water association or other public service provider. However, some multi-family properties such as apartments or mobile home parks may share a single meter and bill occupants according to their individual usage in a process called submetering.

Most meters have a simple dial that moves as water passes through it. A full rotation of the dial equals one cubic foot (or 7.48 gallons). Some have a low flow indicator that rotates even with very little water movement. If the indicator is moving when all water outlets are turned off, you may have a slow leak in your plumbing system.

The best way to test your meter is to turn off all the water in your house indoors and out, including irrigation spigots and ice makers. Then, observe the meter for movement over two to three hours. If it does not move, you probably have a leak somewhere in your plumbing system. If it does move, shut off all the water outlets again and observe the meter for further movement over the next two to three hours.

The main water supply line is the large-diameter pipe that brings freshwater into your home from the public water supply or a private well. This water flows under pressure through a system of pipes to reach every faucet, shower, toilet and other fixture in your house.

If something goes wrong with your plumbing, turning off the main water valve is crucial to protecting your property and minimizing damage. Knowing where your valve is located and how to turn it off can save you valuable time in a crisis.

Most homes have a main shut-off valve located somewhere near where the main water line enters the house. In newer homes, this is often in a basement or crawl space, but it may be in a utility room. In older houses, it’s usually in the front of the foundation or close to the water heater.

There are several types of main shut-off valves, but they all work the same way. You can open or close the valve by rotating the handle. Once the valve is closed, you should be able to hear and feel water stop flowing. Some valves have a round handle, while others have a straight lever. A ball valve shut-off valve is a good choice for residential use as it has few parts that could break or get stuck.

Every member of your family should know where the main shut-off valve is located and how to turn it off. You should also put your plumber’s phone number in everyone’s cellphone and keep his business card on the refrigerator with other emergency numbers. This will allow you to get in touch with your plumber quickly if there is a plumbing disaster that requires emergency service.